Available in three formats, the SureSet StepRise can be used to renovate external steps. 

StepRise is a pre-formed step riser developed by us to provide a workable solution to applying a SureSet resin bound finish to the vertical rise of external steps. Our StepRise is constructed by applying 3mm nominal sized SureSet resin bound paving onto a lightweight high-performance construction board.

StepRise can be applied to a wide range of vertical surfaces including concrete, wood and metal and is designed to, ideally, be used in conjunction with metal step nosing to protect the exposed edge and SureSet permeable paving laid into the treads of the steps.

Standard StepRise

Size:                     1200mm x 200mm x 12.5mm
Mix type:               General use
Stone size:            3mm      

Standard StepRise cut to size 

Details as above but cut to your required size. A maximum two straight cuts with additional cuts available on request.

Custom StepRise

Size:                       Customised to your requirements (up to max 1200mm x 600mm)
Mix type:                General use
Stone size:             3mm

Our standard and custom StepRise are available in the following colour options:  

  • 3mm Natural Aggregate; Barley Beach, Tuscan Barley Beach, Bronze, Norwegian Bronze, Norwegian Pearl, Sterling, Tuscan Terracotta, Forest Green, Winter Frost
  • 3mm Spectrum®   

Additional information:

  • The lead time for StepRise is approximately 1 - 2 weeks (depending on colour and amount ordered).
  • We also supply Diamond and Florento Step Nosing (1.2m), end caps and mastic tubes.
  • SureSet StepRise is available in Supply Only and Supply and Lay options.
  • Please contact us 01985 841180 if you would like to discuss the StepRise options further.